X-PERT Pro (PX) Removable Spinning Pole Set
PLEASE BE AWARE THE ITEM YOU ARE PURCHASING HERE IS A PRE-SALE ITEM.
THIS MEANS STOCK WILL NOT BE ARRIVING UNTIL OCTOBER, MEANING A MID/LATE OCTOBER DELIVERY* AS PER THE BELOW
Exclusive to X-Pole, the ‘X-LOCK’ mechanism requires no tool to change the XPERT PRO from Static to Spinning - just a 'Lift & Twist'.
Taking the best elements of the XPERT, adding in the most advanced spinning & static mechanism in the world, X-LOCK, plus a minimized, sleeker upper dome, and you have the XPERT Pro.
X-LOCK allows you to switch from static to spinning in an instant and back with just a flick of the wrist, no tools needed.
The XPERT Pro is available in Chrome, Stainless Steel, Brass, Powder Coat (Black, Pink & White) and Silicone (45mm diameter only Black & Pink), and in both 40mm & 45mm pole diameters.
- Pressure mounted pole that fits heights between 2260mm (7′ 4″) to 2755mm (9′)
- The sets comes standard with x1 125mm and x1 250mm extensions
- Easy to install and user friendly
- New X-LOCK spinning & static mechanism
- Minimized, sleeker upper dome
- Disassembles quickly for easy storage and transport
- No screws, bolts or drilling needed to set up the XPERT Pro pole
- Safe, sturdy and full instruction manuals/instructional videos available
- Safe for renters!
- 18 Month Local Warranty (on sets purchased with Australia Only)
The XPERT Pro is designed for home use only.
The newly designed, smaller, upper dome has a smooth retro look whilst still maintaining X-Poles world renowned pole stability during use.
Taking the best elements of the world’s top-selling pole, the X-POLE XPERT, adding ‘X-LOCK’ and a new upper dome creates the most technically advanced and safest portable dance pole available today.
Please note: We do not stock the TG (titanium Gold) or the Silicone finish (in the PX) in Australia for reasons relating to Aussie heat, sun & environmental conditions. For more information please contact our office:)
CARRY CASE NOT INCLUDED BUT AVAILABLE AS AN ACCESSORY HERE---> X-POLE Custom Designed Carry Case for X-Pert PRO Set (PX)
MAINTENANCE & LONGEVITY
There are some checks which you should do on a regular basis to maintain the longevity of your X-POLE:
Visual check: Is the pole level & straight – if no, ascertain if the pole is tight – see Check Tightness of Adjuster Rod below.
If you have a ceiling dome – these are intended primarily to be used in domestic situations where the poles need to be removable. If you are using the poles in a commercial context i.e. a pole studio, you need to have the domes fixed in some way to the ceiling to ensure complete stability. This can be done with a ceiling plate – the ceiling plate is a permanent fixture which will prevent any movement of the Upper Dome when using multi-piece poles over 3350 mm/11 ft.
Check your X-Joints, fully loosen off both sides, then tighten evenly, little by little on each side as per your instructions. It is important to tighten the screws progressively – alternating between the screws, tightening clockwise. This will ensure the pressure is equalised within the pole tubes.
Clean your pole with straight metho or if its silicone, order your silicone pole cleaner here
Spin Static lock - Take out the spin/static screws – check for any rounding. If the screws are rounded out, replace immediately. Remember to fully insert the allen key (keeping it straight) into the screw before adjusting, as not doing so causes the screws to round out.
Check Tightness of Adjuster Rod - Put pole to static. Undo adjuster screws and tighten if necessary. Due to movement, temperature, carpets, subsidence, etc. – you need to ensure that the tightness of your poles are adjusted over time. There may be no movement at all – however it is important to check each pole. It is important that you are able to loosen & tighten the adjuster yourself, without using tools or 'muscle-men'.
Our warehouse is situated in Sydney, so east coast orders generally arrive a little quicker than our west coast customers. Once your order is placed please allow 1-2 business day's to allow our warehouse to pick & pack your order, then once the courier collects delivery is 7-10 working days (from collection date) anywhere in Australia. To ensure we have no hassles, please include your postcode, and your mobile number so that we can contact you if we need to!
*Please be aware that these delivery times are approximate only. We CANNOT guarantee delivery any sooner than 7-10days from courier collection (not the time of your order) Please take into consideration unforeseen or unplanned circumstances that may be out of our control Eg. warehouse delays, courier pick-up delays, roads & traffic, high volume of orders to dispatch.
Especially given the COVID situation & sporadic lockdowns - shipping times may vary.
For more information on shipping click here